Nettoolkit:

• 1. Preface
  • 1.1. What is nettoolkit?
• 2. Install Instructions
  • 2.1. Requirements
  • 2.2. Installations
  • 2.3. Inherited python packages
    • 2.3.1. Do this: Enable Macros for MS-Visio
• 3. Version Control
  • 3.1. Version 1.x updates
  • 3.2. Version 0.x updates

Novice Users Documentation:

• 1. Overview
• 2. Nettoolkits GUI
  • 2.1. GUI Launch
    • 2.1.1. IP Scanner Tab
    • 2.1.2. Prefix Operation Tab
    • 2.1.3. Ping Batch Tab
    • 2.1.4. capture-it Tab
    • 2.1.5. Demo Video - Capture-IT
    • 2.1.6. Configure Tab
    • 2.1.7. Config Gen Tab
    • 2.1.8. Crypt Tab
    • 2.1.9. Demo Video - Crypt Tab
    • 2.1.10. Facts Tab
    • 2.1.11. Demo Video - Facts Tab
    • 2.1.12. Juniper Tab
    • 2.1.13. Demo Video - Juniper Tab
    • 2.1.14. Visio Gen Tab
    • 2.1.15. Demo Video - Visio Gen Tab
• 3. NGui Interface

Curious Users Documentation:

• 1. Overview
• 2. Addressing
  • 2.1. addressing as module
    • 2.1.1. bin_mask()
    • 2.1.2. to_dec_mask()
    • 2.1.3. bin2dec()
    • 2.1.4. bin2decmask()
    • 2.1.5. binsubnet()
    • 2.1.6. dec2dotted_ip
    • 2.1.7. subnet_size_to_mask
    • 2.1.8. inv_subnet_size_to_mask
    • 2.1.9. ipv4_octets
    • 2.1.10. range_subset
    • 2.1.11. ns-lookup
    • 2.1.12. IP.ping
    • 2.1.13. inet_address
    • 2.1.14. get_inet_address
    • 2.1.15. get_secondary_inet_address
    • 2.1.16. get_inetv6_address
    • 2.1.17. get_subnet
    • 2.1.18. get_v6_subnet
    • 2.1.19. classful_subnet
  • 2.2. IPv4
    • 2.2.1. IPv4 Object - Overview:
    • 2.2.2. IPv4 Object - Create:
    • 2.2.3. IPv4 object - Properties:
    • 2.2.4. IPv4 object - methods:
    • 2.2.5. IPv4 Object - slices:
    • 2.2.6. IPv4 Object - addition:
    • 2.2.7. Bonus IPV4
  • 2.3. IPv6
    • 2.3.1. IPv6 Object - Overview:
    • 2.3.2. IPv6 Object - Create:
    • 2.3.3. IPv6 object - Properties:
    • 2.3.4. IPv6 object - methods:
    • 2.3.5. IPv6 object - slices:
    • 2.3.6. Bonus IPv6
  • 2.4. Prefix Operations
    • 2.4.1. Check prefix
    • 2.4.2. Create Summaries
    • 2.4.3. create summaries with minimum prefix length
    • 2.4.4. find minssing prefixes from a summary
    • 2.4.5. Create Summaries - Deprycated
    • 2.4.6. Encapsulate subnet
    • 2.4.7. Subnet allocations
    • 2.4.8. sort list of addresses
  • 2.5. IP Subnet Scanner
  • 2.6. Compare IP Scan Results
  • 2.7. Ping-Batch file creation
• 3. Capture-IT
  • 3.1. Capture All
  • 3.2. Capture by Groups
    • 3.2.1. A Sample Excel
  • 3.3. Other Stuff
    • 3.3.1. get_op()
    • 3.3.2. get_ops()
    • 3.3.3. get_device_manufacturar()
• 4. Capture via JumpSSH
  • 4.1. Capture via JumpSSH
• 5. Compare It
  • 5.1. Compare Text files
    • 5.1.1. Sample Execution Code for text configuration Compare
    • 5.1.2. Snap of Execution for Cisco Style configurations
    • 5.1.3. Snap of Execution for Juniper Style configurations
  • 5.2. Compare Excel files
    • 5.2.1. Sample Execution Code for XL Compare
    • 5.2.2. Snap of Execution for Excel files comparisions
• 6. Config-Gen
  • 6.1. Prepare Config Building Instance
  • 6.2. Customize
  • 6.3. Generate
  • 6.4. Jinja Template - Sample
• 7. Configure
  • 7.1. Configure
  • 7.2. Configure Group by cmdslist
  • 7.3. Configure Group by files
  • 7.4. Configure Group by Excel
• 8. Cable-Matrix-Gen
  • 8.1. Provide Necessary Input Parameters for cable matrix
  • 8.2. Generate cable-matrix Excel file
• 9. Facts-Finder
  • 9.1. Generate CleanFacts
  • 9.2. Customize CleanFacts
  • 9.3. Rearrange CleanFacts
• 10. Juniper
  • 10.1. Set Converter
    • 10.1.1. Convert from Standard to Set command
    • 10.1.2. Explanation (to-set)
  • 10.2. Hierachical Converter
    • 10.2.1. Convert from set commands to standard hierachical commands
    • 10.2.2. Explanation (to hierarchy)
  • 10.3. Remarks Removals
    • 10.3.1. Remove the remarks and make clean configuration
    • 10.3.2. Explanation (remove remarks)
• 11. Nettoolkit Class Extension
  • 11.1. String Extensions
    • 11.1.1. string functions:
      • 11.1.1.1. found()
      • 11.1.1.2. foundPos()
      • 11.1.1.3. find_within()
      • 11.1.1.4. string_within()
      • 11.1.1.5. suffix_index_within()
      • 11.1.1.6. find_all()
      • 11.1.1.7. find_any()
      • 11.1.1.8. find_multi()
      • 11.1.1.9. update()
      • 11.1.1.10. replace_dual_and_split()
      • 11.1.1.11. finddualnreplacesingle()
      • 11.1.1.12. indention()
      • 11.1.1.13. is_blank_line()
      • 11.1.1.14. is_hostname_line()
      • 11.1.1.15. hostname()
      • 11.1.1.16. hostname_from_cli()
      • 11.1.1.17. shrink_if()
      • 11.1.1.18. if_standardize()
      • 11.1.1.19. if_prefix()
      • 11.1.1.20. if_suffix()
      • 11.1.1.21. string_concate()
      • 11.1.1.22. right()
      • 11.1.1.23. mid()
      • 11.1.1.24. delete_trailing_remarks()
      • 11.1.1.25. to_list()
      • 11.1.1.26. to_set()
      • 11.1.1.27. prepend_bgp_as()
      • 11.1.1.28. header_indexes()
  • 11.2. List Extensions
    • 11.2.1. List functions:
      • 11.2.1.1. remove_empty_members()
      • 11.2.1.2. expand_vlan_list()
      • 11.2.1.3. convert_vlans_list_to_range_of_vlans_list()
      • 11.2.1.4. list_variants()
      • 11.2.1.5. list_of_devices()
      • 11.2.1.6. split()
      • 11.2.1.7. list_to_octet()
      • 11.2.1.8. longest_str_len()
  • 11.3. Dict Extensions
    • 11.3.1. Dictionary functions:
      • 11.3.1.1. merge_dict()
      • 11.3.1.2. dict_to_str()
    • 11.3.2. Dictionary Differences:
  • 11.4. Database Operations
    • 11.4.1. get_merged_DataFrame_of_file()
    • 11.4.2. append_to_xl()
    • 11.4.3. write_to_xl()
    • 11.4.4. sort_dataframe_on_subnet()
    • 11.4.5. read_xl_all_sheet()
    • 11.4.6. read_an_xl_sheet
    • 11.4.7. dict_to_yaml()
    • 11.4.8. yaml_to_dict()
  • 11.5. Uncategorized Functions
    • 11.5.1. @decorator: printmsg
    • 11.5.2. remove_domain()
    • 11.5.3. read_file()
    • 11.5.4. standardize_mac()
    • 11.5.5. mac_2digit_separated()
    • 11.5.6. mac_4digit_separated()
    • 11.5.7. create_folders()
    • 11.5.8. standardize_if()
    • 11.5.9. get_file_path
    • 11.5.10. get_file_name
    • 11.5.11. create_folders
    • 11.5.12. detect_device_type
    • 11.5.13. CapturesOut
    • 11.5.14. add_blankdict_key
    • 11.5.15. add_blankset_key
    • 11.5.16. add_blanklist_key
    • 11.5.17. add_blanktuple_key
    • 11.5.18. add_blanknone_key
    • 11.5.19. update_key_value
    • 11.5.20. get_vlans_cisco
    • 11.5.21. trunk_vlans_cisco
    • 11.5.22. get_vrf_cisco
• 12. Crypto
  • 12.1. Cisco Type7 key enc/dec
    • 12.1.1. Password encrypt (type-7)
    • 12.1.2. Password decrypt (type-7)
    • 12.1.3. Decrypt type7 passwords from cisco configuration file
    • 12.1.4. Mask type7 passwords from cisco configuration file
  • 12.2. Junuper $9 key enc/dec
    • 12.2.1. Password encrypt ($9)
    • 12.2.2. Password decrypt ($9)
    • 12.2.3. Decrypt all $9 passwords from Juniper configuration file
    • 12.2.4. Mask all $9 passwords from juniper configuration file
  • 12.3. MD5 Generate
• 13. Visio Drawing-Gen
  • 13.1. What is Visio?
  • 13.2. What is Stencils?
    • 13.2.1. Cable Matrix Preparation
      • 13.2.1.1. Manual
      • 13.2.1.2. Auto-Generate
    • 13.2.2. Visio Generation
    • 13.2.3. Samples
      • 13.2.3.1. pyVig readable sample excel file
      • 13.2.3.2. A Sample Stencil : Network and Peripherals
      • 13.2.3.3. Sample Output: without filters
      • 13.2.3.4. Sample Output: with filters multi tab (tab1)
      • 13.2.3.5. Sample Output: with filters multi tab (tab2)
• 14. Yaml Facts
  • 14.1. Yaml Facts Generation

Crazy Users API Documentation:

• 1. Overview
• 2. Addressing
  • 2.1. Addressing
    • Allocate
      • Allocate.assignments
      • Allocate.go_thru_each_section()
      • Allocate.rearrange_size()
      • Allocate.start()
      • Allocate.subnet_allocate()
    • Allocations
      • Allocations.add()
      • Allocations.add_prefix()
      • Allocations.check_ip_in()
      • Allocations.check_range_in()
      • Allocations.get_subnet()
    • IP
      • IP.endsat_dec
      • IP.host_count
      • IP.hosts
      • IP.is_host
      • IP.is_ip_interface
      • IP.is_ip_network
      • IP.is_subset()
      • IP.range
      • IP.startsat_dec
    • IPv4
      • IPv4.BroadcastIP()
      • IPv4.NetworkIP()
      • IPv4.binmask
      • IPv4.bit_length
      • IPv4.broadcast_address()
      • IPv4.broadcast_number_int
      • IPv4.decimalMask
      • IPv4.decmask
      • IPv4.expand()
      • IPv4.get_octet()
      • IPv4.invmask
      • IPv4.ip_number
      • IPv4.ipbinmask()
      • IPv4.ipdecmask()
      • IPv4.ipinvmask()
      • IPv4.ipn()
      • IPv4.ipnetmask()
      • IPv4.n_thIP()
      • IPv4.network_number_int
      • IPv4.size
      • IPv4.subnet_zero()
      • IPv4.to_decimal()
      • IPv4.version
    • IPv6
      • IPv6.BroadcastIP()
      • IPv6.NetworkAddress
      • IPv6.NetworkIP()
      • IPv6.binmask
      • IPv6.bit_length
      • IPv6.broadcast_address()
      • IPv6.decimalMask
      • IPv6.decmask
      • IPv6.expanded
      • IPv6.getHext()
      • IPv6.get_hext()
      • IPv6.invmask
      • IPv6.ipbinmask()
      • IPv6.ipdecmask()
      • IPv6.ipinvmask()
      • IPv6.len()
      • IPv6.n_thIP()
      • IPv6.shrinked()
      • IPv6.subnet_zero()
      • IPv6.version
    • Routes
      • Routes.get_prefix_desc()
      • Routes.inTable()
      • Routes.outerPrefix()
      • Routes.reversed_table
      • Routes.routes
    • Subnet_Allocate
      • Subnet_Allocate.check_range()
      • Subnet_Allocate.get_attributes()
      • Subnet_Allocate.get_nxt_subnet_decimal()
      • Subnet_Allocate.get_subnet()
      • Subnet_Allocate.verification()
    • Summary
      • Summary.calc_subset_prefixes()
      • Summary.calculate()
      • Summary.prefixes
      • Summary.remove_subset_prefixes()
      • Summary.summary()
    • Validation
      • Validation.check_v4_input()
      • Validation.check_v6_input()
    • addressing()
    • bin2dec()
    • bin2decmask()
    • bin_mask()
    • binsubnet()
    • break_prefix()
    • calc_summmaries()
    • classful_subnet()
    • dec2dotted_ip()
    • expand()
    • get_hext()
    • get_inet_address()
    • get_inetv6_address()
    • get_secondary_inet_address()
    • get_subnet()
    • get_subnets()
    • get_summaries()
    • get_v6_subnet()
    • inet_address()
    • inv_subnet_size_to_mask()
    • invmask_to_mask()
    • ipv4_octets()
    • isSplittedRoute()
    • isSubset()
    • is_overlap()
    • mask2subnetsize()
    • range_subset()
    • recapsulate()
    • shrink()
    • sort_by_size()
    • sorted_v4_addresses()
    • subnet_size_to_mask()
    • to_dec_mask()
  • 2.2. Prefix Summaries
    • Aggregate
      • Aggregate.aggregates
      • Aggregate.prefixes
      • Aggregate.summaries
    • Subnet_Spare
      • Subnet_Spare.get_subset_subnets()
      • Subnet_Spare.min_divisor
      • Subnet_Spare.prefixes
      • Subnet_Spare.remove_used_chunks()
      • Subnet_Spare.smallest_divisions
      • Subnet_Spare.smallest_pfx_host_count
      • Subnet_Spare.smallest_pfx_mask
      • Subnet_Spare.summary
      • Subnet_Spare.unused_prefixes()
    • calc_summmaries()
    • get_masks()
  • 2.3. Batch-Gen
    • CreateBatch
    • add_ips_to_lists()
    • create_batch_file()
    • create_batch_file_string()
    • write_out_batch_file()
  • 2.4. IP Subnet-Scan & Compare O/P
    • Ping
      • Ping.add_results()
      • Ping.execute()
      • Ping.get_first_ips()
      • Ping.op_to_xl()
    • compare_ping_sweeps()
  • 2.5. Port-Scan
    • PortScanner
      • PortScanner.execute()
      • PortScanner.open_ports
      • PortScanner.port_results
      • PortScanner.timeout
    • ip_port_scan()
    • subnet_port_scan()
• 3. capture-it
  • 3.1. cap_summary
    • LogSummary
    • SummaryDisplay
    • TableReport
      • TableReport.all_cmds
      • TableReport.cmd_exec_logs_all
      • TableReport.device_type_all
      • TableReport.get_updated_cmd_exec_log()
      • TableReport.host_vs_ips
      • TableReport.show()
      • TableReport.split_by_device_types()
      • TableReport.write_to()
  • 3.2. captures
    • Captures
      • Captures.add_exec_logs()
      • Captures.grp_cmd_capture()
      • Captures.write_facts()
  • 3.3. clp
    • CLP
      • CLP.check_config_authorization()
      • CLP.cmd_capture()
      • CLP.configure()
  • 3.4. command
    • COMMAND
      • COMMAND.add_to_file()
      • COMMAND.commandOP
      • COMMAND.get_cmd_banner()
      • COMMAND.send_to_file()
    • delete_file_ifexist()
  • 3.5. common
    • exec_log()
    • juniper_add_no_more()
  • 3.6. conn
    • conn
      • conn.check_config_mode
      • conn.check_enable_mode
      • conn.clsStr
      • conn.device_type
      • conn.devtype
      • conn.find_prompt
      • conn.hn
      • conn.host
  • 3.7. detection
    • DeviceType
      • DeviceType.dtype
  • 3.8. exec_device
    • Execute_Device
      • Execute_Device.CustomClass
      • Execute_Device.add_cmd_exec_logs()
      • Execute_Device.add_cmd_to_all_cmd_dict()
      • Execute_Device.add_cmds_to_self()
      • Execute_Device.add_exec_logs()
      • Execute_Device.append_capture
      • Execute_Device.auth
      • Execute_Device.capture_path
      • Execute_Device.check_facts_finder_requirements()
      • Execute_Device.cmds
      • Execute_Device.command_capture()
      • Execute_Device.cumulative
      • Execute_Device.fg
      • Execute_Device.forced_login
      • Execute_Device.get_max_cmd_length()
      • Execute_Device.get_missing_commands()
      • Execute_Device.ip
      • Execute_Device.is_any_ff_cmds_missed()
      • Execute_Device.mandatory_cmds_retries
      • Execute_Device.missed_commands_capture()
      • Execute_Device.missing_captures_only
      • Execute_Device.parsed_output
      • Execute_Device.retry_missed_cmds()
      • Execute_Device.run_cmds()
      • Execute_Device.run_custom_commands()
      • Execute_Device.run_facts_generation_required_commands()
      • Execute_Device.standard_output
      • Execute_Device.update_cmds_for_missing_captures_only()
      • Execute_Device.update_obj_properties()
      • Execute_Device.verify_connection()
      • Execute_Device.write_facts_to_excel()
  • 3.9. executions
    • Execute_By_Excel
      • Execute_By_Excel.execute()
      • Execute_By_Excel.get_devices_commands_dicts()
      • Execute_By_Excel.remove_blank_entries()
    • Execute_By_Individual_Commands
    • Execute_By_Login
      • Execute_By_Login.execute()
    • Execute_Common
      • Execute_Common.dependent_cmds()
      • Execute_Common.generate_clean_facts_file()
      • Execute_Common.generate_facts()
      • Execute_Common.is_valid()
      • Execute_Common.log_summary()
      • Execute_Common.show_failures
      • Execute_Common.update_all_cmds()
      • Execute_Common.update_other_properties()
      • Execute_Common.write_exec_log()
• 4. capture via jumpssh
  • 4.1. capture via jumpssh execution module
    • Captures_via_Jump_Server
      • Captures_via_Jump_Server.cmds_list_dict
      • Captures_via_Jump_Server.device_password
      • Captures_via_Jump_Server.device_username
      • Captures_via_Jump_Server.devices
      • Captures_via_Jump_Server.execute()
      • Captures_via_Jump_Server.output_path
      • Captures_via_Jump_Server.print_report()
      • Captures_via_Jump_Server.server
      • Captures_via_Jump_Server.server_login_password
      • Captures_via_Jump_Server.server_login_username
      • Captures_via_Jump_Server.server_private_key_file
      • Captures_via_Jump_Server.update_reporting_dict()
      • Captures_via_Jump_Server.validate_inputs()
    • capture_by_jump_server_login()
  • 4.2. capture via jumpssh jump_server module
    • JumpServer
      • JumpServer.connect_server()
      • JumpServer.create_server_session()
      • JumpServer.erase_hostkey()
      • JumpServer.get_cmd_output()
      • JumpServer.get_remote_session()
      • JumpServer.server
      • JumpServer.server_login_password
      • JumpServer.server_login_username
      • JumpServer.server_private_key_file
  • 4.3. capture via jumpssh device module
    • Device
      • Device.append
      • Device.capture()
      • Device.cmds_list_dict
      • Device.create_device_session()
      • Device.create_output_file()
      • Device.cumulative
      • Device.device
      • Device.device_password
      • Device.device_types
      • Device.device_username
      • Device.failed_retry_count
      • Device.filter_captured_commands()
      • Device.final_cmd_report
      • Device.init_var()
      • Device.interactive_cmd_report
      • Device.is_cmd_capture_available()
      • Device.is_valid_device_type()
      • Device.is_valid_session()
      • Device.jump_host
      • Device.missing_only
      • Device.output_path
      • Device.pre_checks_and_sets()
      • Device.remark_char_dict
      • Device.standard_output
      • Device.write_output()
  • 4.4. capture via jumpssh commands module
    • Command
      • Command.append_output_to_file()
      • Command.banner_lines
      • Command.capture()
      • Command.cmd
      • Command.device
      • Command.device_session
      • Command.device_type
      • Command.double_line
      • Command.failed_retry_count
      • Command.final_cmd_report
      • Command.interactive_cmd_report
      • Command.is_cmd_capture_available()
      • Command.log_message()
      • Command.missing_only
      • Command.output_file
      • Command.output_file_read
      • Command.remark_char
      • Command.standard_output
      • Command.strip_extra_lf_characters()
      • Command.write_output_to_file()
    • Commands
      • Commands.capture()
      • Commands.cumulative
      • Commands.device
      • Commands.device_session
      • Commands.device_type
      • Commands.failed_retry_count
      • Commands.final_cmd_report
      • Commands.interactive_cmd_report
      • Commands.list_of_cmds
      • Commands.missing_only
      • Commands.output_file
      • Commands.read_capture_file()
      • Commands.remark_char
      • Commands.standard_output
  • 4.5. capture via jumpssh validations module
    • Validate
      • Validate.input_append_bool()
      • Validate.input_cmds_list_dict_dict()
      • Validate.input_cumulative_bool()
      • Validate.input_device_username_str()
      • Validate.input_devices_iterable()
      • Validate.input_final_cmd_report_bool()
      • Validate.input_interactive_cmd_report_bool()
      • Validate.input_max_connections_int()
      • Validate.input_missing_only_bool()
      • Validate.input_server_login_username_str()
      • Validate.input_server_str()
      • Validate.input_tablefmt_str()
  • 4.6. capture via jumpssh exceptions module
    • Report_Bug_cisco_CSCsq51052()
• 5. compare-it
  • 5.1. diff module
    • CiscoHierarchy
      • CiscoHierarchy.add_line_to_dict()
      • CiscoHierarchy.config
      • CiscoHierarchy.descent_block()
      • CiscoHierarchy.exceptional_lines_maps()
      • CiscoHierarchy.indented_block()
      • CiscoHierarchy.mask_passwords()
      • CiscoHierarchy.remarked_lines()
      • CiscoHierarchy.section_conf()
      • CiscoHierarchy.trailing_remarks_update()
    • CompareExcelData
      • CompareExcelData.conv_df_to_dict()
      • CompareExcelData.diff()
      • CompareExcelData.get_df()
      • CompareExcelData.get_dict_diffs()
    • CompareText
      • CompareText.cfg
      • CompareText.detect_types()
      • CompareText.get_ct_object()
      • CompareText.is_cfg_match()
    • Compare_Text_Cisco
      • Compare_Text_Cisco.get_diff()
      • Compare_Text_Cisco.serialize_files()
    • Compare_Text_Juniper
      • Compare_Text_Juniper.check_diff()
      • Compare_Text_Juniper.get_diff()
      • Compare_Text_Juniper.serialize_files()
      • Compare_Text_Juniper.to_set()
    • Compare_Text_Papa
      • Compare_Text_Papa.differences
      • Compare_Text_Papa.serialize_files()
    • get_string_diffs()
  • 5.2. compare_config module
    • CompareConfig
      • CompareConfig.get_config()
      • CompareConfig.get_differeces()
      • CompareConfig.write_diff()
    • get_config_type()
    • get_configuration()
    • is_captureit_config()
• 6. configure
  • 6.1. configure
    • ConfigEnvironmentals
    • Config_common
      • Config_common.get_connection()
      • Config_common.get_device_type()
      • Config_common.send_configuration()
      • Config_common.set_hostname()
      • Config_common.terminate_connection()
      • Config_common.write_config_log()
      • Config_common.write_exec_log()
    • Configure
      • Configure.apply()
      • Configure.cisco_commit()
      • Configure.cisco_enable()
      • Configure.cisco_push()
      • Configure.cisco_verify_push_op()
      • Configure.juniper_commit()
      • Configure.juniper_push()
      • Configure.juniper_verify_commit_op()
      • Configure.juniper_verify_push_op()
    • ConfigureByExcel
      • ConfigureByExcel.get_concurrance()
      • ConfigureByExcel.run()
    • GroupsConfigure
      • GroupsConfigure.configure_by_orderlist()
      • GroupsConfigure.execute()
      • GroupsConfigure.remove_empty_config_lines()
      • GroupsConfigure.remove_order_list_item()
• 7. facts-finder
  • 7.1. facts_gen
    • 7.1.1. facts_gen
      • FactsGen
      • get_absolute_command()
      • get_necessary_cmds()
    • 7.1.2. clean
      • CleanFacts
      • cisco_config()
      • get_clean_filename()
      • get_hostname_from_logfile()
      • juniper_config()
      • remove_file()
    • 7.1.3. device
      • DevicePapa
    • 7.1.4. excel facts generator - execution boilerplate codes
      • exec_facts_finder()
      • get_host()
      • update_device_dict()
  • 7.2. generators_cisco
    • Cisco
      • Cisco.dev_type
      • Cisco.parse()
      • Cisco.run_parser()
      • Cisco.verify()
    • absolute_command()
    • get_op_cisco()
  • 7.3. generators_juniper
    • Juniper
      • Juniper.dev_type
      • Juniper.parse()
      • Juniper.run_parser()
      • Juniper.verify()
    • absolute_command()
  • 7.4. generator common functions
  • 7.5. cisco generator common functions
  • 7.6. juniper generator common functions
  • 7.7. cisco parser - arp
    • get_arp_table()
  • 7.8. cisco parser - bgp
    • AddressFamily
      • AddressFamily.bgp_read()
    • BGP
      • BGP.bgp_read()
    • BGP_Papa
      • BGP_Papa.bgp_nbr_attributes()
      • BGP_Papa.get_nbr_attributes()
    • get_bgp_af_running()
    • get_bgp_running()
    • merge_vrftype_name_inkey()
  • 7.9. cisco parser - cdp
    • get_cdp_neighbour()
  • 7.10. cisco parser - if description
    • get_interface_description()
  • 7.11. cisco parser - if status
    • get_interface_status()
  • 7.12. cisco parser - lldp
    • get_lldp_neighbour()
  • 7.13. cisco parser - mac
    • get_mac_address_table()
  • 7.14. cisco parser - ospf
    • OSPF
      • OSPF.active_interfaces()
      • OSPF.get_active_interfaces()
      • OSPF.get_networks()
      • OSPF.get_router_id()
      • OSPF.get_summaries()
      • OSPF.networks()
      • OSPF.ospf_read()
      • OSPF.router_id()
      • OSPF.summaries()
    • get_ospf_running()
  • 7.15. cisco parser - interfaces
    • RunningInterfaces
      • RunningInterfaces.get_int_channel_group()
      • RunningInterfaces.get_int_mode_details()
      • RunningInterfaces.get_int_ospf_auth()
      • RunningInterfaces.get_int_udld()
      • RunningInterfaces.get_int_vlan_details()
      • RunningInterfaces.get_int_vrf()
      • RunningInterfaces.get_interface_description()
      • RunningInterfaces.get_interface_state()
      • RunningInterfaces.get_interface_v4_helpers()
      • RunningInterfaces.get_interface_v6_helpers()
      • RunningInterfaces.get_ip_details()
      • RunningInterfaces.get_ipv6_details()
      • RunningInterfaces.interface_channel_group()
      • RunningInterfaces.interface_description()
      • RunningInterfaces.interface_ips()
      • RunningInterfaces.interface_mode()
      • RunningInterfaces.interface_ospf_auth()
      • RunningInterfaces.interface_read()
      • RunningInterfaces.interface_state()
      • RunningInterfaces.interface_udld()
      • RunningInterfaces.interface_v4_helpers()
      • RunningInterfaces.interface_v6_helpers()
      • RunningInterfaces.interface_v6_ips()
      • RunningInterfaces.interface_vlans()
      • RunningInterfaces.interface_vrf()
    • get_interfaces_running()
  • 7.16. cisco parser - prefix lists
    • RunningPrefixLists
      • RunningPrefixLists.get_obj_dict()
      • RunningPrefixLists.pl_dict()
      • RunningPrefixLists.pl_read()
    • get_system_running_prefix_lists()
  • 7.17. cisco parser - routes
    • RunningRoutes
      • RunningRoutes.get_route_dict()
      • RunningRoutes.route_read()
      • RunningRoutes.routes_dict()
    • get_administrative_dist()
    • get_multi_idx_item()
    • get_pfx_nh_idxdist()
    • get_singel_idx_item()
    • get_system_running_routes()
    • index_of()
  • 7.18. cisco parser - sys_info
    • RunningSystem
      • RunningSystem.system_bgp_as_number()
      • RunningSystem.system_ca_certificate()
      • RunningSystem.system_exec_banner()
      • RunningSystem.system_hostname()
      • RunningSystem.system_name_server()
      • RunningSystem.system_ntp_server()
      • RunningSystem.system_syslog_server()
      • RunningSystem.system_tacacs_server()
    • get_system_running()
  • 7.19. cisco parser - vrf
    • RunningVRFs
      • RunningVRFs.get_vrf_af()
      • RunningVRFs.get_vrf_description()
      • RunningVRFs.get_vrf_rd()
      • RunningVRFs.get_vrf_rt()
      • RunningVRFs.vrf_af()
      • RunningVRFs.vrf_description()
      • RunningVRFs.vrf_rd()
      • RunningVRFs.vrf_read()
      • RunningVRFs.vrf_rt()
    • get_vrfs_running()
  • 7.20. cisco parser - version
    • get_version()
  • 7.21. juniper parser - arp
    • get_arp_table()
  • 7.22. juniper parser - hardware
    • JuniperChassisHardware
      • JuniperChassisHardware.get_sfp()
    • get_chassis_hardware()
    • get_chassis_serial()
  • 7.23. juniper parser - if description
    • get_int_description()
  • 7.24. juniper parser - lldp
    • get_lldp_neighbour()
  • 7.25. juniper parser - bgp
    • RunningIntanceBGP
      • RunningIntanceBGP.bgp_grp_info()
      • RunningIntanceBGP.bgp_nbr_info()
      • RunningIntanceBGP.get_bgp_grp_info()
      • RunningIntanceBGP.get_bgp_nbr_info()
      • RunningIntanceBGP.instance_bgp_nbr_read()
      • RunningIntanceBGP.instance_read()
    • get_instances_bgps()
  • 7.26. juniper parser - interfaces
    • RunningInterfaces
      • RunningInterfaces.get_int_description()
      • RunningInterfaces.get_int_filter()
      • RunningInterfaces.get_int_vlan_details()
      • RunningInterfaces.get_interface_channel_grp()
      • RunningInterfaces.get_interface_mode()
      • RunningInterfaces.get_ip_details()
      • RunningInterfaces.get_ipv6_details()
      • RunningInterfaces.get_ospf_authentication_details()
      • RunningInterfaces.int_dot_zero_merge_to_parent1()
      • RunningInterfaces.int_filter()
      • RunningInterfaces.int_to_int_number()
      • RunningInterfaces.interface_channel_grp()
      • RunningInterfaces.interface_description()
      • RunningInterfaces.interface_ips()
      • RunningInterfaces.interface_mode()
      • RunningInterfaces.interface_read()
      • RunningInterfaces.interface_v6_ips()
      • RunningInterfaces.interface_vlans()
      • RunningInterfaces.ospf_auth_para_read()
      • RunningInterfaces.ospf_authentication_details()
      • RunningInterfaces.routing_instance_read()
    • get_interfaces_running()
    • get_logical_port_number()
    • get_physical_port_number()
    • set_of_voice_vlans()
  • 7.27. juniper parser - ospf
    • RunningOSPF
      • RunningOSPF.get_interface_type()
      • RunningOSPF.get_ospf_authentication()
      • RunningOSPF.get_passive_interfaces()
      • RunningOSPF.get_summaries()
      • RunningOSPF.interface_type()
      • RunningOSPF.ospf_authentication()
      • RunningOSPF.ospf_read()
      • RunningOSPF.passive_interfaces()
      • RunningOSPF.summaries()
    • get_instances_ospfs()
  • 7.28. juniper parser - routes
    • RunningRoutes
      • RunningRoutes.get_route_dict()
      • RunningRoutes.route_read()
      • RunningRoutes.routes_dict()
      • RunningRoutes.v6routes_dict()
    • get_system_running_routes()
  • 7.29. juniper parser - bgp instances
    • RunningIntances
      • RunningIntances.get_vrf_description()
      • RunningIntances.get_vrf_route_target()
      • RunningIntances.instance_read()
      • RunningIntances.vrf_description()
      • RunningIntances.vrf_route_target()
    • get_instances_running()
  • 7.30. juniper parser - system
    • RunningSystem
      • RunningSystem.club_list_items()
      • RunningSystem.convert_sets_to_strs()
      • RunningSystem.get_banner()
      • RunningSystem.get_gtac_servers()
      • RunningSystem.get_hostname()
      • RunningSystem.get_mgmt_ip()
      • RunningSystem.get_nameservers()
      • RunningSystem.get_ntp_servers()
      • RunningSystem.get_syslog_servers()
      • RunningSystem.get_system_as_number()
      • RunningSystem.system_as_number()
      • RunningSystem.system_banner()
      • RunningSystem.system_gtac_servers()
      • RunningSystem.system_hostname()
      • RunningSystem.system_mgmt_ip()
      • RunningSystem.system_nameservers()
      • RunningSystem.system_ntp_servers()
      • RunningSystem.system_read()
      • RunningSystem.system_syslog_servers()
    • get_running_system()
  • 7.31. juniper parser - configuration
    • Running
  • 7.32. juniper parser - version
    • get_version()
  • 7.33. Cisco Modifier - table
    • TableInterfaceCisco
      • TableInterfaceCisco.merge_interface_data()
      • TableInterfaceCisco.po_to_interface()
      • TableInterfaceCisco.remove_duplicates()
      • TableInterfaceCisco.update_functional_cols()
      • TableInterfaceCisco.update_intf_vrf()
      • TableInterfaceCisco.update_neighbor_intf()
    • filter_col()
    • h4block()
    • interface_mode()
    • intvrf_update()
    • nbr_hostname()
    • subnet()
    • vlan_members()
  • 7.34. Cisco Modifier - var
    • VarCisco
      • VarCisco.update_ipv6_hext2_3()
  • 7.35. Cisco Modifier - vrf
    • TableVrfsCisco
  • 7.36. Cisco - merger
    • cisco_modifier()
    • get_cmd_list_cisco()
  • 7.37. Cisco - commands
  • 7.38. Juniper Modifier - table
    • TableInterfaceJuniper
      • TableInterfaceJuniper.merge_interface_data()
      • TableInterfaceJuniper.remove_duplicates()
  • 7.39. Juniper Modifier - var
    • VarJuniper
  • 7.40. Juniper Modifier - merger
    • get_cmd_list_juniper()
    • juniper_modifier()
  • 7.41. Juniper Modifier - commands
  • 7.42. modifiers_common
    • DataFrameInit
      • DataFrameInit.read_int_sheets()
    • KeyExchanger
      • KeyExchanger.read_column_mapper()
      • KeyExchanger.update_cisco_cmd_lst()
    • TableInterfaces
      • TableInterfaces.pdf_dict
    • TableVrfs
      • TableVrfs.add_filter_col()
      • TableVrfs.drop_mtmt_vrf()
      • TableVrfs.pdf_dict
      • TableVrfs.update_column_names()
      • TableVrfs.update_rt()
    • Var
      • Var.convert_to_dataframe()
      • Var.create_a_temp_v6_hext2_3_column()
      • Var.pdf_dict
      • Var.update_device()
      • Var.update_var()
  • 7.43. mergers
    • 7.43.1. mergers cisco
      • CiscoMerge
    • 7.43.2. mergers juniper
      • JuniperMerge
      • add_access_vlan_column()
    • 7.43.3. mergers common
      • Merged
      • remove_duplicates()
      • split_to_multiple_tabs()
  • 7.44. rearrange
    • 7.44.1. table columns
      • rearrange_tables()
• 8. j2config
  • 8.1. jinja operations
    • PrepareConfig
      • PrepareConfig.check_jinja_var_tab_variables()
      • PrepareConfig.custom_class_add_to_filter()
      • PrepareConfig.custom_module_methods_add_to_filter()
      • PrepareConfig.filters
      • PrepareConfig.start()
  • 8.2. common functions
    • addressing()
    • as_path_repeat()
    • comma_separated()
    • convert_to_int()
    • get_item()
    • get_summaries()
    • groups_of_nine()
    • int_to_str()
    • invmask()
    • iprint()
    • ipv6_urpf_acl_network()
    • list_append()
    • list_extend()
    • list_sorted()
    • mask()
    • netmask()
    • nth_ip()
    • physical_if_allowed()
    • remove_trailing_zeros()
    • space_separated()
    • str_to_list()
    • string()
    • string_as_is()
    • v4addressing()
  • 8.3. data collections
    • ABSRegion
      • ABSRegion.frames
    • DeviceDetails
      • DeviceDetails.merge_vars()
      • DeviceDetails.merge_with_var_frames()
      • DeviceDetails.merged_table_columns()
      • DeviceDetails.read_device()
      • DeviceDetails.read_table()
      • DeviceDetails.verify_input_dev_file()
    • read_excel()
    • read_worksheet()
    • to_int()
  • 8.4. filters
    • Aggregated
    • Bgp
      • Bgp.bgp_peers()
      • Bgp.vrf_not_none()
    • Common
    • Loopback
    • Ospf
      • Ospf.area_summary_tupples()
      • Ospf.vrf()
    • Physical
      • Physical.interface()
      • Physical.interface_type()
      • Physical.interface_type_ends()
      • Physical.sorted()
      • Physical.sorted_interfaces()
      • Physical.uplinks()
    • Static
      • Static.default_route()
      • Static.has_nexthop()
      • Static.version()
      • Static.vrf()
    • Vlan
      • Vlan.of_instance()
      • Vlan.vlan()
      • Vlan.vlans_sorted_range()
    • Vrf
      • Vrf.sorted()
      • Vrf.sorted_vpnids()
      • Vrf.sorted_vrf_data()
      • Vrf.sorted_vrf_data_by_vpnid()
      • Vrf.vrf_get()
      • Vrf.vrf_not_none()
    • sort()
  • 8.5. general python functions
    • get_model_template_version()
  • 8.6. conditions capturing
    • JinjaVarCheck
      • JinjaVarCheck.clean_file
      • JinjaVarCheck.global_file
      • JinjaVarCheck.jinja_file
    • get_conditions()
    • get_variables()
  • 8.7. execution boilerplate code
    • exec_config_generation()
    • get_custom_classes()
    • get_custom_funcs()
    • get_host()
• 9. nettoolkit
  • 9.1. GPL
    • Container
      • Container.objVar
    • DB
      • DB.read_excel()
    • DIC
      • DIC.dict_to_str()
      • DIC.merge_dict()
      • DIC.recursive_dic()
    • Default
    • DictMethods
      • DictMethods.append()
    • DifferenceDict
      • DifferenceDict.additive
      • DifferenceDict.get_change()
      • DifferenceDict.missing
    • IO
      • IO.add_to_file()
      • IO.copy_text_file()
      • IO.csv_to_tuple()
      • IO.devices_on_log_files()
      • IO.file_list_for_time_stamp()
      • IO.file_to_list()
      • IO.file_to_str()
      • IO.jinja_verification()
      • IO.timestamps_for_device()
      • IO.to_file()
      • IO.update()
    • LOG
      • LOG.time_stamp()
    • LST
      • LST.convert_vlans_list_to_range_of_vlans_list()
      • LST.expand_vlan_list()
      • LST.flatten()
      • LST.list_of_devices()
      • LST.list_to_octet()
      • LST.list_variants()
      • LST.longest_str_len()
      • LST.remove_empty_members()
      • LST.split()
    • Multi_Execution
      • Multi_Execution.end()
      • Multi_Execution.execute()
      • Multi_Execution.execute_mt()
      • Multi_Execution.execute_sequencial()
      • Multi_Execution.execute_steps()
      • Multi_Execution.execute_threads_max()
      • Multi_Execution.get_devices()
      • Multi_Execution.max_connections
      • Multi_Execution.start()
    • STR
      • STR.delete_trailing_remarks()
      • STR.ending()
      • STR.find_all()
      • STR.find_any()
      • STR.find_multi()
      • STR.find_within()
      • STR.finddualnreplacesingle()
      • STR.found()
      • STR.foundPos()
      • STR.get_logfile_name()
      • STR.header_indexes()
      • STR.header_indexes_using_splitby()
      • STR.hostname()
      • STR.hostname_from_cli()
      • STR.if_prefix()
      • STR.if_standardize()
      • STR.if_suffix()
      • STR.indention()
      • STR.intf_standardize_or_null()
      • STR.is_blank_line()
      • STR.is_hostname_line()
      • STR.mid()
      • STR.prepend_bgp_as()
      • STR.replace_dual_and_split()
      • STR.right()
      • STR.shrink_if()
      • STR.starting()
      • STR.string_concate()
      • STR.string_within()
      • STR.suffix_index_within()
      • STR.to_list()
      • STR.to_set()
      • STR.update()
      • STR.update_str()
    • XL_READ
      • XL_READ.column_values()
      • XL_READ.filter()
    • XL_WRITE
    • dict_differences()
    • get_cisco_int_type()
    • get_device_manu()
    • get_juniper_int_type()
    • get_password()
    • get_username()
    • interface_type()
    • standardize_if()
  • 9.2. Convert Dictionary
    • ConvDict
      • ConvDict.convert_table_dic()
      • ConvDict.convert_var_dic()
      • ConvDict.expand_dfdic_to_dict()
      • ConvDict.expand_to_dict()
      • ConvDict.set_index_keys_parents()
      • ConvDict.set_var_table_keys()
      • ConvDict.to_dataframe()
    • appendkey()
    • dict_to_yaml()
    • expand_table_dict()
    • expand_var_dict()
    • recursive_dic()
    • standup_dic()
    • update_nested_key()
    • varsheet()
    • yaml_to_dict()
  • 9.3. Database
    • XL_READ
      • XL_READ.read_sheets()
    • XL_WRITE
      • XL_WRITE.copy_of_file()
      • XL_WRITE.get_valid_file_name()
      • XL_WRITE.write()
    • append_to_xl()
    • get_merged_DataFrame_of_file()
    • read_an_xl_sheet()
    • read_xl()
    • read_xl_all_sheet()
    • sort_dataframe_on_subnet()
    • write_to_xl()
  • 9.4. Common Functions
    • CapturesOut
      • CapturesOut.abs_cmd_function_map
      • CapturesOut.abs_cmd_map
      • CapturesOut.abs_commands
      • CapturesOut.capture_log_file
      • CapturesOut.cmd_output()
      • CapturesOut.device_manufacturar
      • CapturesOut.has()
      • CapturesOut.name
      • CapturesOut.outputs
    • abs_command_cisco()
    • abs_command_juniper()
    • blank_line()
    • create_folders()
    • dataframe_generate()
    • deprycation_warning()
    • detect_device_type()
    • flatten()
    • get_device_manufacturar()
    • get_file_name()
    • get_file_path()
    • get_op()
    • get_ops()
    • get_string_part()
    • get_string_trailing()
    • mac_2digit_separated()
    • mac_4digit_separated()
    • open_excel_file()
    • open_folder()
    • open_text_file()
    • printmsg()
    • read_file()
    • read_yaml_mode_us()
    • remove_domain()
    • standardize_mac()
    • verifid_output()
  • 9.5. Formatting
    • print_banner()
    • print_table()
  • 9.6. Networking
    • IP
      • IP.bin2dec()
      • IP.inv2dec()
      • IP.ping_average()
    • expand_if()
    • expand_if_dict()
    • get_int_ip()
    • get_int_mask()
    • get_interface_cisco()
    • get_juniper_pw_string()
    • get_vlans_cisco()
    • get_vlans_juniper()
    • get_vrf_cisco()
    • nslookup()
    • trunk_vlans_cisco()
  • 9.7. Forms
    • 9.7.1. Form items
      • DoubleClick
      • TripleClick
      • activity_finish_popup()
      • add_cable_n_connectors()
      • banner()
      • blank_line()
      • button_cancel()
      • button_ok()
      • button_pallete()
      • enable_disable()
      • footer()
      • get_cable_n_connectors()
      • get_cache()
      • get_list()
      • item_line()
      • popupmsg()
      • tabs()
      • tabs_display()
      • under_line()
      • update_cache()
• 10. pyjuniper
  • 10.1. Juniper
    • Juniper
      • Juniper.convert_to_hierarchy()
      • Juniper.convert_to_set()
      • Juniper.input_file
      • Juniper.output_file
      • Juniper.remove_remarks()
    • convert_to_set_from_captures()
  • 10.2. jset
    • JSet
      • JSet.check_n_update_hostname()
      • JSet.convert_to_set()
      • JSet.end_chars
      • JSet.get_extended_output_lines()
      • JSet.get_line_items()
      • JSet.get_output_line()
      • JSet.hostname_str
      • JSet.input_file
      • JSet.input_list
      • JSet.is_blank_line()
      • JSet.is_brckt_end()
      • JSet.is_brckt_start()
      • JSet.is_config_start()
      • JSet.is_end_of_line()
      • JSet.is_multisection_inputs()
      • JSet.is_remarked_line()
      • JSet.objVar
      • JSet.print_conversion_log()
      • JSet.remove_remarks_from_config()
      • JSet.save_last_annotation()
      • JSet.send_to_conversion_log()
      • JSet.to_set
      • JSet.vlan_configs_begin
      • JSet.vlan_configs_begins
  • 10.3. hierarchy
    • Convert
      • Convert.add_to_str()
      • Convert.closure
      • Convert.clubbed_candidate_terminator_lines()
      • Convert.convert
      • Convert.distributed_candidate_terminator_lines()
      • Convert.exception()
      • Convert.front_tabs
      • Convert.grp_candidate_straight()
      • Convert.grp_candidates_clubbed()
      • Convert.grp_candidates_distributed()
      • Convert.grp_has_suffix_candidate()
      • Convert.grp_nested()
      • Convert.grp_suffixes()
      • Convert.logic_groups()
      • Convert.logic_terminators()
      • Convert.terminator_line
      • Convert.update_front_tabs()
      • Convert.update_prefix()
    • Hierarchy
      • Hierarchy.convert()
    • Section
      • Section.add()
    • excluded()
    • included()
    • li_li_words()
    • mysplit()
    • recursive_item_lookup()
    • related_list()
    • section_dict()
    • zero_items()
  • 10.4. hierarchy_rules
• 11. pynetcrypt
  • 11.1. cisco passwords
    • decrypt_file_passwords()
    • decrypt_type7()
    • encrypt_type7()
    • mask_file_passwords()
  • 11.2. juniper passwords
    • decrypt_doller9_file_passwords()
    • juniper_decrypt()
    • juniper_encrypt()
    • mask_doller9_file_passwords()
  • 11.3. md5 calculate
    • get_md5()
    • str_hash()
• 12. pyvig
  • 12.1. pyVig - operations
    • CableMatrix
    • DFGen
      • DFGen.add_b_device_media_types()
      • DFGen.add_cable_connector_details()
      • DFGen.add_model_n_serial_number_to_cabling()
      • DFGen.arrange_cablings()
      • DFGen.blank_dfs()
      • DFGen.calculate_cordinates()
      • DFGen.custom_attributes()
      • DFGen.custom_functions()
      • DFGen.custom_var_functions()
      • DFGen.map_color()
      • DFGen.merge_cable_type()
      • DFGen.remove_duplicate_cabling_entries()
      • DFGen.remove_duplicate_cablings()
      • DFGen.remove_subintf_from_ports()
      • DFGen.remove_undefined_cabling_entries()
      • DFGen.run()
      • DFGen.standardize_intf_on_ports()
      • DFGen.update()
      • DFGen.update_cable_connector()
      • DFGen.update_cabling_df()
      • DFGen.update_color()
      • DFGen.update_devices_df()
      • DFGen.update_weight()
    • DF_ConverT
      • DF_ConverT.convert()
      • DF_ConverT.get_self_details()
      • DF_ConverT.update_cablings()
      • DF_ConverT.update_device_self_detils()
      • DF_ConverT.update_devices()
      • DF_ConverT.update_devices_df_pattern_n_custom_func()
      • DF_ConverT.update_devices_for()
    • get_color()
    • get_model_number()
    • get_serial_number()
    • merge_port_for_duplicates()
    • remove_duplicates()
    • update_b_media_type()
    • update_color()
    • update_weight()
  • 12.2. pyVig - pyVig
    • cabling_data_operations()
    • device_data_operations()
    • pyVig()
    • repeat_for_filter()
    • visio_operations()
    • visio_page_operation()
  • 12.3. pyVig - statics
  • 12.4. pyVig - exec_fns
  • 12.5. pyVig - devices
    • AdevDevices
      • AdevDevices.add_to_devices()
      • AdevDevices.add_vlan_info()
      • AdevDevices.get_self_device_df()
    • device_df_drop_empty_duplicates()
    • update_var_df_details_to_table_df()
  • 12.6. pyVig - entities
    • Connectors
      • Connectors.execute()
      • Connectors.get_optional_columns_value()
    • ItemObjects
      • ItemObjects.bottom_most
      • ItemObjects.execute()
      • ItemObjects.left_most
      • ItemObjects.page_height
      • ItemObjects.page_width
      • ItemObjects.right_most
      • ItemObjects.top_most
    • get_col_value()
  • 12.7. pyVig - stencils
    • get_list_of_stencils()
  • 12.8. pyVig - cablings
    • ADevCablings
      • ADevCablings.add_to_cablings()
      • ADevCablings.cabling_dataframe()
      • ADevCablings.update_attrib()
  • 12.9. pyVig - mathamatics
    • CalculateXY
      • CalculateXY.calc()
      • CalculateXY.calc_xs()
      • CalculateXY.calc_ys()
      • CalculateXY.count_of_ho()
      • CalculateXY.get_x()
      • CalculateXY.get_y()
      • CalculateXY.inverse_y()
      • CalculateXY.merge_xy_filter_dfs_with_dev_df()
      • CalculateXY.sort()
      • CalculateXY.update_xs()
      • CalculateXY.update_xy_for_sheet_filter_dict()
      • CalculateXY.update_ys()
    • CalculateXYNative
      • CalculateXYNative.add()
      • CalculateXYNative.add_x_y_to_df()
      • CalculateXYNative.calc()
      • CalculateXYNative.count_of_devices()
      • CalculateXYNative.dev_connectors_dict()
      • CalculateXYNative.device_add()
      • CalculateXYNative.get_nbr_devices()
      • CalculateXYNative.get_xy()
      • CalculateXYNative.iterate()
    • df_with_slops_and_angles()
    • slop_to_angled_connector()
    • slop_to_straight_connector()
  • 12.10. pyVig - common functions
    • get_filename()
  • 12.11. pyVig - database functions
    • CableMatrixData
      • CableMatrixData.calc_slop()
      • CableMatrixData.filter()
      • CableMatrixData.filter_eligible_cables_only()
      • CableMatrixData.optional_columns
      • CableMatrixData.sheet_name
    • Data
      • Data.add_attribute()
      • Data.add_kwargs_attributes()
      • Data.add_optional_columnnames_attributes()
      • Data.read()
      • Data.verify_mandatory_declared_cols_availabilty()
    • DeviceData
      • DeviceData.add_description()
      • DeviceData.add_format_columnnames_attributes()
      • DeviceData.default_stencil
      • DeviceData.format_columns
      • DeviceData.optional_columns
      • DeviceData.sheet_name
      • DeviceData.x
      • DeviceData.y
    • merged_df_on_hostname()
  • 12.12. pyVig - general functions
    • drop_empty()
    • get_dev_hostname()
    • get_dev_model()
    • get_dev_serial()
    • get_item_first()
    • get_patterns()
    • get_physical_if_relevants()
    • get_physical_if_up()
    • get_vlan_if_relevants()
    • get_vlan_if_up()
    • get_vlans_info()
    • series_item_0_value()
    • update_merged_df_series()
    • update_pattern()
    • update_vlans_info()
• 13. yaml_facts
  • 13.1. yaml_facts - facts
    • YamlFacts
      • YamlFacts.capture_log_file
      • YamlFacts.output_folder
      • YamlFacts.parser_cls_map
  • 13.2. yaml_facts - common
    • CommonParser
      • CommonParser.add_parsed_fields_to_device_dict()
      • CommonParser.captures
      • CommonParser.output_folder
      • CommonParser.output_yaml
      • CommonParser.parse()
      • CommonParser.parse_func()
      • CommonParser.set_output_yaml_filename()
      • CommonParser.write_yaml()
    • get_ntc_template_file()
    • get_self_template_file()
    • get_template_dir()
    • get_template_file()
    • is_exist()
    • parse_to_dict()
    • parse_to_dict_cmd()
    • parse_to_list()
    • parse_to_list_cmd()
  • 13.3. yaml_facts - cisco
    • CiscoParser
      • CiscoParser.captures
      • CiscoParser.cmd_fn_parser_map
      • CiscoParser.output_folder
  • 13.4. yaml_facts - juniper
    • JuniperParser
      • JuniperParser.captures
      • JuniperParser.cmd_fn_parser_map
      • JuniperParser.output_folder
  • 13.5. yaml_facts - cisco - parsers
    • cisco_addressing_on_list()
    • parse_to_dict_using_ntc()
    • parse_to_list_using_ntc()
    • remove_remarks()
    • update_port_on_int_type()
    • get_arp_table()
    • get_cdp_neighbour()
    • get_interface_description()
    • get_lldp_neighbour()
    • get_mac_address_table()
    • RunningInterfaces
      • RunningInterfaces.attr_functions
      • RunningInterfaces.cmd_op
      • RunningInterfaces.get_interfaces_lines_dict()
    • get_int_channel_group()
    • get_int_description()
    • get_int_eigrp()
    • get_int_ip_details()
    • get_int_ipv6_details()
    • get_int_isis()
    • get_int_mode_details()
    • get_int_ospf_auth()
    • get_int_rip()
    • get_int_state()
    • get_int_udld()
    • get_int_v4_helpers()
    • get_int_v6_helpers()
    • get_int_vlan_details()
    • get_int_vrf()
    • get_interfaces_running()
    • get_interface_status()
    • RunningPrefixLists
      • RunningPrefixLists.get_obj_dict()
      • RunningPrefixLists.pl_dict()
      • RunningPrefixLists.pl_read()
    • get_system_running_prefix_lists()
    • BGPConf
      • BGPConf.attr_functions
      • BGPConf.peer_attr_functions
      • BGPConf.run_list
      • BGPConf.supported_af_types
    • get_bgp_running()
    • EIGRPConf
      • EIGRPConf.attr_functions
      • EIGRPConf.get_eigrp_af_lines_dict()
      • EIGRPConf.get_eigrp_lines_dict()
      • EIGRPConf.get_eigrp_sub_af_lines_dict()
      • EIGRPConf.group_by
      • EIGRPConf.shirnk_None_vrf_dict()
      • EIGRPConf.supported_af_types
    • get_eigrp_running()
    • ISISConf
      • ISISConf.attr_functions
      • ISISConf.get_isis_af_lines_dict()
      • ISISConf.get_isis_lines_dict()
      • ISISConf.shirnk_None_vrf_dict()
      • ISISConf.supported_af_types
    • get_isis_running()
    • OSPF
      • OSPF.attr_functions
      • OSPF.run_list
    • get_ospf_running()
    • RIPConf
      • RIPConf.attr_functions
      • RIPConf.supported_af_types
    • get_rip_running()
    • ProtocolsConfig
      • ProtocolsConfig.multi_instance_protocols
      • ProtocolsConfig.protocol_config_initialize()
      • ProtocolsConfig.remove_empty_vrfs()
      • ProtocolsConfig.run_list
      • ProtocolsConfig.single_instance_protocols
    • get_protocol_instance_dict()
    • RunningRoutes
      • RunningRoutes.get_route_dict()
      • RunningRoutes.route_read()
      • RunningRoutes.routes_dict()
    • get_administrative_dist()
    • get_multi_idx_item()
    • get_pfx_nh_idxdist()
    • get_singel_idx_item()
    • get_system_running_routes()
    • index_of()
    • RunningSystem
      • RunningSystem.system_bgp_as_number()
      • RunningSystem.system_ca_certificate()
      • RunningSystem.system_exec_banner()
      • RunningSystem.system_hostname()
      • RunningSystem.system_name_server()
      • RunningSystem.system_ntp_server()
      • RunningSystem.system_syslog_server()
      • RunningSystem.system_tacacs_server()
    • get_system_running()
    • get_version()
    • RunningVRFs
      • RunningVRFs.get_vrf_af()
      • RunningVRFs.get_vrf_description()
      • RunningVRFs.get_vrf_rd()
      • RunningVRFs.get_vrf_rt()
      • RunningVRFs.vrf_af()
      • RunningVRFs.vrf_description()
      • RunningVRFs.vrf_rd()
      • RunningVRFs.vrf_read()
      • RunningVRFs.vrf_rt()
    • get_vrfs_running()
  • 13.6. yaml_facts - juniper - parsers
    • get_int_port_dict()
    • get_numbered_port_dict()
    • get_pw()
    • parse_to_dict_using_ntc()
    • parse_to_list_using_ntc()
    • remove_remarks()
    • HelperAddresses
      • HelperAddresses.attr_functions
      • HelperAddresses.cmd_op
      • HelperAddresses.get_system_helpers_lines_dict()
      • HelperAddresses.iterate_to_get_helpers()
    • get_helper()
    • get_helper_running()
    • Instances
      • Instances.add_protocol_instance_info()
      • Instances.cmd_op
      • Instances.get_instance_lines()
      • Instances.instance_attr_functions
      • Instances.iterate_instance_funcs()
      • Instances.start()
    • get_instance_running()
    • get_vrf_desc()
    • get_vrf_rd()
    • get_vrf_rt()
    • get_arp_table()
    • get_interface_description()
    • JuniperChassisHardware
      • JuniperChassisHardware.get_sfp()
    • get_chassis_hardware()
    • get_chassis_hardware_iterative()
    • get_lldp_neighbour()
    • RunningInterfaces
      • RunningInterfaces.cmd_op
      • RunningInterfaces.filter_instance_lines()
      • RunningInterfaces.filter_interface_lines()
      • RunningInterfaces.filter_ospfauth_lines()
      • RunningInterfaces.get_attributes()
      • RunningInterfaces.get_instance_lines_dict()
      • RunningInterfaces.get_interfaces_lines_dict()
      • RunningInterfaces.get_ospfauth_lines_dict()
      • RunningInterfaces.instance_attr_functions
      • RunningInterfaces.int_attr_functions
      • RunningInterfaces.lines_to_function_map
      • RunningInterfaces.ospfauth_attr_functions
      • RunningInterfaces.start()
      • RunningInterfaces.update_lines_dict()
    • get_int_channel_grp()
    • get_int_description()
    • get_int_instance()
    • get_int_ip_details()
    • get_int_ipv6_details()
    • get_int_ospf_auth()
    • get_int_port_mode()
    • get_int_vlan_details()
    • get_interfaces_running()
    • set_of_voice_vlans()
    • RunningPrefixLists
      • RunningPrefixLists.attr_functions
      • RunningPrefixLists.cmd_op
      • RunningPrefixLists.filter_prefixlist_lines()
      • RunningPrefixLists.get_attributes()
      • RunningPrefixLists.get_pfx_lines_dict()
      • RunningPrefixLists.pfx_str_begin_with
      • RunningPrefixLists.start()
    • get_pfx_list_prefix()
    • get_system_running_prefix_lists()
    • BGP
      • BGP.add_protocol_bgp_instance_peers()
      • BGP.bgp_attr_functions
      • BGP.cmd_op
      • BGP.get_peers_dict()
      • BGP.iterate_peer_funcs()
      • BGP.peer_attr_functions
      • BGP.start()
    • get_bgp_peer_auth()
    • get_bgp_peer_common_info()
    • get_bgp_peer_description()
    • get_bgp_peer_localas()
    • get_bgp_peer_multihop()
    • get_bgp_peer_peeras()
    • get_bgp_peer_peers()
    • get_bgp_running()
    • ISIS
      • ISIS.cmd_op
      • ISIS.get_isis_instances_dict()
      • ISIS.get_protocol_isis_instance_lines()
      • ISIS.isis_attr_functions
      • ISIS.isis_intf_attr_functions
      • ISIS.isis_lvl_attr_functions
      • ISIS.isis_nested_attr_functions
      • ISIS.iterate_for_isis_instances()
      • ISIS.iterate_isis_attr_funcs()
      • ISIS.iterate_isis_intf_attr_funcs()
      • ISIS.iterate_isis_lines()
      • ISIS.start()
    • get_isis_instance_running()
    • get_isis_int_options()
    • get_isis_lvl_options()
    • get_isis_options()
    • get_isis_parent_running()
    • get_isis_running()
    • OSPF
      • OSPF.cmd_op
      • OSPF.get_area_ids()
      • OSPF.get_ospf_area_ids_lines()
      • OSPF.get_ospf_other_lines()
      • OSPF.get_protocol_ospf_instance_lines()
      • OSPF.iterate_area_funcs()
      • OSPF.iterate_for_ospf()
      • OSPF.iterate_instance_funcs()
      • OSPF.ospf_area_attr_functions
      • OSPF.ospf_instance_attr_functions
      • OSPF.start()
    • get_area_interface_attributes()
    • get_area_interface_auth_attributes()
    • get_area_interface_next_item_attributes()
    • get_area_interface_true_item_attributes()
    • get_area_range_attributes()
    • get_area_shamlink_attributes()
    • get_area_stub_attributes()
    • get_area_stub_def_lsa_item_attributes()
    • get_area_stub_next_item_attributes()
    • get_area_stub_true_item_attributes()
    • get_area_virtuallink_attributes()
    • get_instance_attribute_spf_options()
    • get_instance_attributes()
    • get_ospf3_running()
    • get_ospf_running()
    • RIP
      • RIP.cmd_op
      • RIP.get_protocol_rip_instance_lines()
      • RIP.get_rip_group_dict()
      • RIP.get_rip_group_lines()
      • RIP.get_rip_other_lines()
      • RIP.iterarte_group_lines()
      • RIP.iterarte_other_lines()
      • RIP.iterate_for_rip()
      • RIP.rip_attr_functions
      • RIP.rip_grp_attr_functions
      • RIP.start()
    • get_authentication_attributes()
    • get_rip_auth_attributes()
    • get_rip_bfdld_attributes()
    • get_rip_instance_attributes()
    • get_rip_nbr_attributes()
    • get_rip_running()
    • PeerLines
      • PeerLines.bgp_peer_group_lines
      • PeerLines.peer
      • PeerLines.peer_group_lines
      • PeerLines.peer_group_lines_spl
    • ProtocolObject
      • ProtocolObject.cmd_op
      • ProtocolObject.initialize()
      • ProtocolObject.protocol
    • Running
      • Running.cmd_op
      • Running.iterate_logical_systems()
      • Running.remove_parent_vrf_if_standalone()
      • Running.separate_logical_systems()
      • Running.start()
    • VrfLines
      • VrfLines.bgp_other_lines
      • VrfLines.bgp_peer_group_lines
      • VrfLines.peer_group_names
      • VrfLines.protocol
      • VrfLines.protocol_lines
      • VrfLines.protocol_spl_lines
      • VrfLines.protocol_vrf_lines
      • VrfLines.vrf
    • jProtocolLines
      • jProtocolLines.config_lines
      • jProtocolLines.protocol
    • RunningRoutes
      • RunningRoutes.attr_functions
      • RunningRoutes.cmd_op
      • RunningRoutes.filter_n_merge()
      • RunningRoutes.filter_routes_lines()
      • RunningRoutes.get_attributes()
      • RunningRoutes.get_vrf_list()
      • RunningRoutes.get_vrf_pfx_lines()
      • RunningRoutes.route_spl_str
      • RunningRoutes.split_vrf_and_route_portions()
      • RunningRoutes.start()
    • get_static_next_hop()
    • get_static_preferance()
    • get_static_remark()
    • get_static_resolve()
    • get_static_retain()
    • get_static_tag()
    • get_system_running_routes()
    • RunningSystem
      • RunningSystem.attr_functions
      • RunningSystem.cmd_op
      • RunningSystem.filter_system_lines()
      • RunningSystem.start()
    • get_system_as_number()
    • get_system_banner()
    • get_system_common_attrs()
    • get_system_gtac_servers()
    • get_system_mgmt_ip()
    • get_system_ntp_servers()
    • get_system_running()
    • get_system_syslog_servers()
    • get_chassis_serial()
    • get_version()

Indices and tables

• Index

• Module Index

• Search Page